From the monthly archives:

September 2016

Product # 44032
Material = CNC Machined 6061-T6
OD= 6.00″
ID= 3.510″
Height = 0.500″
Installed height without pump = 0.625″
Bolt Circle A (BW EFI) = x12 @ 5.00″ BCL
Bolt Circle B (Aeromotive) = x10 10-32 @ 4.00″ BCL
This CNC machined aluminum adater will allow you to adapt any
Aeromotive phantom, A1000 or Eliminator in tank pump that utilizes the
10 bolt pattern to the Boyd Welding 12 bolt pattern.
Kit Includes:
1) CNC Machined Adapter Plate
1) BW EFI Buna Gasket
12) 10-32 1″ Stanless Screws (BW Pattern)
10) 10-32 3/4″ Stainlss Screws ( Aeromotive Pattern)
You will use the gasket and nylon washers that was supplied with the aeromotive pump you purchased.
do not try to use the screws supplied with Aeromotive pumps.
$58.00

Add to Cart

{ 0 comments }

Product #27041

Cap:
- Material = 6061 CNC Machined Aluminum
- Threads = 11.5″ TPI
- Vented= NO
- Lanyard = NO
- Gasket = Buna O-ring

Neck:
- Material= 6061 CNC Machined Aluminum
- Threads= 11.5″
- OD = 4.975″ Overall
- ID = 3.300 ID
- Bolt Hole = x6 .201 THRU 4.350″ BCL

Installation:
-Bolt- IN
- Overall Installed Height W/ Cap = .210″
- Hole Cut Size = 3.760″ MIN / 3.950″ MAX
- Bolt hole Center = 4.350″
Kit Includes:
- 1 CAP W/ Oring and Delrin Key
- 1 Bolt In Neck
- 1 Buna Gasket
- 1 Under Ring W/10-32 thread serts
- 8 SS 10-32 Flat Head Machine Screw
$89.75

Add to Cart

{ 0 comments }