Custom Aluminum Diesel Fuel and Gas Tanks
From the category archives:
Extra large capacity tank fits the Coleman 5000 generators
Tank dimensions: 26 x 15.5 x 12
Gallons = 15 gallons
Material: .125 mill aluminum
Kelch neck (use existing cap)
1/4″ NPT draw fitting in bottom
This is a must have for camping, racing, off-roading or long term power outages. No need to carry gas cans again. Meets all EPA CARB requirements.
Tank dimensions = 30 x 26.5 x 15
Tank Material = .125 Mill aluminum
35 Gallons
(1) 1.5″ ribbed pipe for filler
(1)7/8″ Ribbed Vent fitting
Provisions to use the stock pump
Includes mounting Straps
includes rollover Safety vent
Fits in all 06 F-350 rear skid plates.
Click Below for more pics
Tank dimensions = 30 x 26.5 x 15
Tank Material = .125 Mill aluminum
35 Gallons
(1)1.5″ ribbed pipe for filler
(1)7/8″ Ribbed Vent fitting
Includes Mouting Straps
Includes rollover safety Vent
Provisions to use the stock pump
Fits in all 06 F-550 rear skid plates.
Click Below for more pics
Tank Dimensions: 18 x 12 x 12
Tank Material: .125 aluminum
(1) Standard Twist Cap
(1).375 FPT vent
(1).375 FPT W/Pick up tube
(1).375 FPT return or extra fitting
(1) Sending unit flange
(4) 1.5 x 1.5 aluminum mounting tabs
Picture shown is actual tank.
Tank Dimensions: 18 x 12 x 12
Tank Material: 14GA mild steel
(1) Standard Twist Cap
(1).375 NPT vent
(1).375 NPT W/Pick up tube
(1).375 NPT return or extra fitting
(1) Sending unit flange
(4) 1.5 x 1.5 Steel mounting tabs
Picture shown is actual tank.
Please Call For Availability and Pricing!
More Info…
Tank Dimensions: 18 x 12 x 12
Tank Material: .125 aluminum
(1) Wisco Flush Aircraft Filler
(1) 1/2 NPT vent
(1) 1/2 NPT W/Pick up tube
(1) 1/2 NPT return or extra fitting
(1) Sending unit flange
(4) 1.5 x 1.5 aluminum mounting tabs
Tank Dimensions: 12 x 12 x 21
Tank Material: .125 aluminum
(1) Wisco Flush Aircraft Filler
(1)1/2 NPT vent
(2) 1/2 NPT Fittings on bottom sump for Draw
(1) 1/2 NPT return or extra fitting
(4) 1.5 x 1.5 aluminum mounting tabs
(1) Fuel Sump
Tank Dimensions: 30 x 12 x 12
Tank Material: .125 aluminum
(1) Standard Vented Twist Cap
(1) 3/8 NPT Pickup Tube
(1)3/8 NPT Fitting on bottom end for drain
(1) Standard Sending Unit Flange
(4) 1.5 x 1.5 aluminum mounting tabs
Tank Dimensions: 40 X 22 X 6.5
Tank Material: .125 aluminum
(1)1.5″ Ribbed for hose filler
(1).375 od vent tube ribbed
(1).375 FPT W/Pick up tube
(2) Baffles
(1) Sending Unit Flange
(1) Ground Tab
Tank Dimensions: 48 x 7 x 17
Tank Material: .125 aluminum
(1)Standard Twist Cap & Neck
(1) .5 Vent
(1) 2″ NPT Pump Fitting
(1) sending unit flange
(2) 1.5 x 2 x 6 aluminum mounting tabs
(2) Baffles
Shop Online
Tank Dimensions: 24 x 18 x 12
Tank Material: .125 aluminum
(1) 2″ Ribbed for Hose Filler
(1) 3/8 NPT vent
(2)1/2 NPT Fittings on bottom end for draw
(1) 3/8 NPT return or extra fitting
(4) 1.5 x 1.5 aluminum mounting tabs
(1) Sending unit flange
Tank Dimensions: 48L x 10W x 18T
Tank Material: .125 aluminum
(1)Standard Twist Cap & Neck
(1) .375 FTP vent
(1) .375 FPT W/Pick up tube
(1) sending unit flange
(4) 1.5 x 1.5 aluminum mounting tabs
(2) Baffles
Tank Dimensions: 48 x 18 x 10
Tank Material: .125 aluminum
(1)Standard Twist Cap & Neck
(1) .375 FTP vent
(1) .375 FPT W/Pick up tube
(1) .375 FPT return or extra fitting
(1) sending unit flange
(4) 1.5 x 1.5 aluminum mounting tabs
(2) Baffles
Shop Online
Tank Dimensions: 48 x 10 x 18
Tank Material: .125 aluminum
(1) GPI 15 GPH Pump
(1)Standard Twist Cap & Neck
(1) .5 Vent
(1) 2″ NPT Pump Fitting
(2) 1.5 x 2 x 6 aluminum mounting tabs
(2) Baffles
Tank Dimensions: 50 x 12 x 16
Tank Material: .125 aluminum
(1)Standard Twist Cap & Neck *vented
(1) 2″ fitting for transfer pump
(1) 1/2 NPT for drain
(1) 1/2 NPT for gravity feed
(1) sending unit flange
(2) 1.5 x 1.5 x 6 aluminum mounting tabs
(2) Baffles
Maximum overall height = 18″ with cap
Shop Online
More Info…
Tank Material: .125 Mill Aluminum
Tank Dimensions 48 x 24 x 17 – (19″ W/Cap)
(1) Velvac Non-Vented Cap
(1) 2″ Npt for transfer pump
(3) 1/2 NPT fittings for Gravity Feed, Drain and Vent
(4) Mounting Tabs
(2)Baffles
CALL TO ORDER THIS TANK.
Shop Online
Tank Dimensions:
48 x 22 x 16 Step= 8T x 11D
Will fit most full size trucks with roll up cover
Brass non-vented (Velvac) Cap
(2) .5 NPT at bottom for Gravity feed
(1) .5 NPT Vent
(2) baffles
(4) mounting tabs
Shown with optional Either side Fill
Tank Dimensions: 48 X 39 X 9
Tank Material: .125 aluminum
(1)1.5″ Ribbed for hose filler
(1).375 od vent tube ribbed
(1).375 FPT W/Pick up tube
(2) Baffles
(1) Sending Unit Flange
(1) Ground Tab
