Part# 32005
-8 An Rollover Safety Vent
-Must Be Welded in
- Aluminum
From the category archives:
Parts
Boyd Welding 2″ NPT Threaded Aluminum Cap
Machined Finish
NON Vented
6″ Chain and Crossbar
Aluminum Fill Neck must be welded on
overall length roughly 3″
2″ Rubber Filler Pipe hose
Flexible without kinking
Can be bent almost any angle.
Best fuel filler hose you can buy!
Sold per/ft
Select how many feet you need by adding or subtracting QTY in Checkout
2″ Rubber Filler Pipe hose
NOT Flexable without kinking
Best used in Straight Fitment applications
Sold per/ft
Select how many feet you need by adding or subtracting QTY in Checkout
5/16 Fuel Hose For EFI Applications
Sold Per/ft
Select how long you need by adding or subtracting QTY in Checkout
5/16 NON EFI Fuel Hose
Sold Per/ft
Select how long you need by adding or subtracting QTY in Checkout
Part# CN021
Non Vented Aluminum 4″ fuel cap
Threads onto 4″ male NPT
12″ chain and cross bar
Aluminum Neck must be welded to Tank
overall height roughly 3.5″
Part# CN020
Cast aluminum
Threads onto a 2″ male NPT
Vented
Pad lockable
Perfect for Stationary Bulk Tanks
2″ NPT Threaded Aluminum Cap
NON Vented
6″ Chain and Crossbar
Aluminum Fill Neck must be welded on
overall length roughly 3″
2″ Mushroom Vent
Threads onto a 2″ NPT Male Fitting
Best used in Stationary Bulk Containers
Screen to keep Bugs out
Part# CN018
Threads into 1/2 NPT female fitting
5/16 hose barb
Machined From Brass
1″ installed height
No Thermal Relief
This part is required by D.O.T on all Transfer or Aux Fuel tanks.
Mechanical Gauge
Fits 5 bolt Flanges
Choose Tank Depth Below
Sender should be at-least 1″ shorter than Inside tank depth
2″ Fuel Gauge
240-33 Ohm
Universal application
Dont forget the matching Tank Level Sender!
In-Line fuel filter for Gasoline applications
Use with 5/16 or 3/8 fuel lines (choose below)
Inline 12V Rotary Vane Pump
Used For gasoline or diesel applications
70 GPH
Perfect for transferring Gasoline or diesel from your AUX tank to your Primary tank.
- .125 Mill Aluminum
- Aluminum Hinge and Rivets Will Not Rust
- Self Ejecting Butterfly Dzus Fastner
* Standard nozzle hanger
* Comes with 10 feet of hose
* Direct tank mount
* UL listed motor
* Two-piece suction pipe
-Standard connection used for most marine and truck application.
-Will not corrode threads
Shop Online
More Info…
Adjustable depth of 5-26″
Standard 5 bolt flange
O-Ring 10-32 machine screws
Includes Gasket
Required in most racing applications
Block Dimensions = 16 x 6 x 3
Sold individually
Does not allow Fuel slosh and prevents fuel starvation.
Tube Style sending unit required.
Most tanks require multiple blocks
Must be replaced every 5 years
Call to Order!
Allows air in but does not allow fuel out.
Part# CN009
Threads into 1/2 Npt female fitting
5/16 hose barb
Installed height is 1″ or less
Required for all Transfer tanks, Aux tanks, Race Tanks
Thermal Relief
Comes in Small or Medium Sizes
.125 5052 Aluminum
Select your fitting sizes!
Must be welded in tank
U.S Standard 5 bolt flange
Aluminum heat treated
10-32 machine screw threads
Will fit most sending units
Must be welded in tank
3/8 or 1/2 NPT fitting with pickup tube welded to the back
Standard length is 12″ / 18″ / 24″ (cut to fit yourself)
call to request custom length
MUST BE WELDED INTO EXISTING TANK
-fittings used on all of our tanks
-Aluminum, Steel, Stainless Steel
-NPT Threads
Many Sizes Availible
BUY IN BULK (50+) SAVE $$
Flush Racecar Filler (positive locking)
6 Bolt Mounting
Comes With Gasket and Mounting Hardware
Perfect if you have tight space requirements
Brass non-vented thermal relief Cap
2″ male threaded neck
Must Be Welded in!
Perfect for Transfer Tanks
Aluminum Weld-In Neck
Approx 1.5″ in height
Vented or Non-Vented
Great cap for many universal applications.
See Videos Page for demonstration!
