Part# 32005
-8 An Rollover Safety Vent
-Must Be Welded in
- Aluminum

Shop Online

Tank dimensions = 40 x 9.5 x 10

Tank Material = .125 Mill aluminum

(1) 2″ ribbed pipe for filler
(1) Sending Unit Flange
(4) 1.5 x 2″ mounting tabs
(2) Baffles
(1) 1/2 npt fitting for Roll Over Vent
(1) Aeromotive A1000 In-tank Pump

Fits without any modification to your chassis or body panels

Shop Online

Tank dimensions = 40 x 9.5 x 10

Tank Material = .125 Mill aluminum

(1) 2″ ribbed pipe for filler
(1) Sending Unit Flange
(4) 1.5 x 2″ mounting tabs
(2) Baffles
(1) 1/2 npt fitting for Roll Over Vent
(1) Aeromotive Stealth 340 IN-Tank EFI pump

Fits without any modification to your chassis or body panels

Shop Online

The tank looks great and fits perfect. I have attached a couple of photos of the tank installed in the chassis. Hopefully in the next few weeks I’ll be able to send some of the finished chassis, painted a dark blue, which should really make the aluminum tank stand out.
Thanks again for all the help and for providing a great looking product.

Walter S. Green
2g Performance, LLC

Dan: Just want to thank you guys for the gas tank you built for me. It is accurate to my drawing in every detail, and beautifully crafted. You guys are the best!

‘ Till next time, Regards.
Bob

I have installed the new fuel tank on my motorhome. The workmanship and fitup were excellent. I will recomend your company to anyone needing a replacement fuel tank for a motor home. Once again THANK YOU for the excellent job on my fuel tank.
Bob Carlson, Rozet Wyoming

Several weeks ago I searched the internet to find someone to build me a custom aluminum one gallon header tank for my experimental aircraft. I came across Boyd Welding website and saw the custom tanks that this company manufactures and decided to give them a call to see if they could fabricate this small header tank. I had the pleasure of speaking with a gentleman, Dan Hance, about building this header tank and he was interested in building this tank if I could send him some drawings. I sent him some drawings and pictures of a plastic header tank that I wanted copied and Dan sent me back within a day, the quote for the cost of this header tank. The price for the header tank I felt was very reasonable so I asked Dan to build this tank. After I sent him the drawings I realized I had a couple of changes dimensional wise so I called Dan and he kindly made the changes to my request and one week later I had my new header tank. I could not be more pleased with how it was fabricated and how nice it was to work with Dan Hance. If someone needs a custom fuel tank or cell made, Boyd Welding is your answer. Their pricing is reasonable and their workmanship is first class plus the customer service is the kind of service we are all looking for.

Extra large capacity tank fits the Coleman 5000 generators

Tank dimensions: 26 x 15.5 x 12
Gallons = 15 gallons
Material: .125 mill aluminum
Kelch neck (use existing cap)
1/4″ NPT draw fitting in bottom

This is a must have for camping, racing, off-roading or long term power outages. No need to carry gas cans again. Meets all EPA CARB requirements.

Shop Online

The fuel tank has arrived and it looks great!

I fitted it in and it seems to fit perfectly. Amazing, I was able to send you guys a simple drawing, and you fabricated the tank perfect from the other side of the continent. And then shipped it up to me all for significantly less money than any of the local shops could do it.

A big thank you from Alaska!

Reuben

Boyd Welding 2″ NPT Threaded Aluminum Cap
Machined Finish
NON Vented
6″ Chain and Crossbar
Aluminum Fill Neck must be welded on
overall length roughly 3″

Shop Online